The Cal 2000

Electrochemical Gas Generator

 

The Cal 2000 provides unmatched versatility and accuracy in corrosive calibration gases.  Field replaceable electro-chemical generating cells provide a calibration standard for accurately testing chlorine, chlorine dioxide, hydrogen, hydrogen cyanide, and hydrogen sulfide gas sensors.

The Cal 2000 is microprocessor controlled and has an LCD display allowing field adjustable ppm and flow rate.  The generating cells are interchangeable and field replaceable.  Best of all, the Cal 2000 provides up to 50 times as much calibration gas as a disposable cylinder at approximately the same cost.  The electrochemical generating cells do not degrade over time.

The Cal 2000 gas generator has a built-in mass flow sensor that automatically compensates for altitude and temperature.  The mass flow sensor combined with the instruments internal pump, provide extreme flexability for calibrating both diffusion and sample draw detection systems.

The CAL 2000 gas generator's features include:
 

compact "hand-held" design low power consumption alkaline battery powered

adjustable ppm and flow rate automatic purge on shut down interchangeable calibration gases

Instrument Specifications

Chlorine (Micro-Cell) 0.05-1.0 ppm  @ 0.5 LPM Chlorine 0.5-50 ppm  @ 0.5 LPM Chlorine Dioxide 0.5-5 ppm  @ 0.5 LPM Hydrogen 0.5-50 ppm  @ 0.5 LPM Hydrogen Cyanide 0.5-50 ppm  @ 0.5 LPM Hydrogen Sulfide 0.5-50 ppm  @ 0.5 LPM Hydrogen Sulfide (Micro-Cell) 0.05-1.0 ppm  @ 0.5 LPM Air Flow Rate  (with  Internal pump) 0.2 to 1.0 LPM Sample Draw Rate  (with pump disabled) 0.1 to 5.0 LPM

Cell Life 50 or 100 hours Warm-up Time (to 90%) Approx. 5 minutes L x W x H 8.50 x 4.25 x 3.00 inches Weight 3 pounds Operating  Temperature 0 to 50 C Relative Humidity 0-100% Accuracy +/- 10% Repeatability +/- 5% Battery Power 4 alkaline "C" Battery Life 10 hours (at .5 LPM  flow rate)

For a printer friendly version of this information visit our Downloads page.